Posted in

What is the elongation of LSAW pipe?

Hey everyone, it’s Jake from your go-to LSAW pipe supplier here. Today I wanna break down something that comes up a lot in our order calls, especially when folks are working on oil and gas pipelines, structural projects, or even water mains: the elongation of LSAW pipe. If you’ve ever wondered why this number matters more than just a random stat on a spec sheet, stick around— I’m gonna keep this real, no textbook jargon that makes your eyes glaze over. LSAW Pipe

First, let’s get what LSAW even stands for out of the way quick, because I get it, acronyms get confusing. LSAW is Longitudinal Submerged Arc Welded pipe. Unlike spiral welded pipe, where the weld twists around the pipe length, LSAW is made by rolling a flat steel plate into a straight, long tube and then welding the seam along that straight edge. That’s why LSAW pipes are perfect for big-diameter projects— we can make ‘em up to like 160 inches across, way bigger than most other welded types.

Now, elongation. Plain and simple, it’s how much a pipe can stretch before it breaks. But not just any stretch— it’s measured as a percentage of the original length. Like, if you take a 10-inch long piece of LSAW pipe, pull on both ends until it stretches 1.5 inches before it snaps, that’s 15% elongation. That number’s not just a flex test for fun, though. For guys out there installing pipelines that have to handle temperature swings, soil movement, or even the weight of whatever’s flowing through ‘em, this is make-or-break stuff.

Wait, let’s clarify how we actually test it, because there’s a standard way we don’t mess around with. We take a small coupon of the pipe wall (usually cut from the weld area, since that’s the weakest spot) and clamp it in a tensile testing machine. The machine pulls slowly until the coupon stretches, and we track two points marked 2 inches apart (that’s the standard gauge length for pipe, by the way). Once it snaps, we measure how far apart those two points are now, subtract the original 2 inches, divide that by 2, times 100 to get the percentage. For LSAW pipe, the industry minimums usually sit between 15% and 20% depending on the steel grade— like Grade X52 might lean 18%, Grade X70 could be 20%.

Why does this matter so much for my customers? Let’s use real examples from jobs we’ve supplied lately. Last year, we did a big pipeline project in Texas where the soil shifts a lot with seasonal rain and drought. The contractor told us they almost went with a cheaper spiral welded pipe, but their engineer flagged elongation as a red flag. Spiral welded pipe usually has lower elongation because the spiral weld creates more weak points along the length. The contractor switched to our LSAW pipe, which has a uniform weld along the seam, so the elongation is way more consistent. When the soil shifted a foot over 5 years, the pipe stretched just enough to absorb that movement without cracking— if it was the lower elongation stuff, it would’ve snapped and shut down the line.

Another example: structural pipe for a bridge project in Ohio. The LSAW pipes were used as support columns under the bridge deck. Those columns have to handle heavy traffic loads, and also expand and contract in the summer heat. If the pipe had low elongation, it would’ve stayed rigid and transferred stress right to the welds, causing cracks. Our LSAW’s elongation let the pipe flex a tiny bit with temperature changes, so the stress distributed evenly across the whole structure. That’s the stuff we don’t talk enough about— it’s not just about holding weight, it’s about handling the everyday forces you don’t see.

Now, let’s bust a common myth I hear all the time from new customers. Some folks think “higher elongation = better pipe” and want the max number we can give. That’s not exactly right. If elongation is too high, that usually means the steel is too soft, which might not hold up to pressure or corrosion. It’s a balance. We spec elongation based on the project: for high-pressure oil pipelines, we aim 18-20% because they need to handle both stretch and pressure; for structural pipe, 15-18% works because they need rigidity too. I always tell my customers don’t chase the highest number— tell me what your project’s dealing with, and I’ll hook you up with the right elongation spec for your needs.

Also, why is LSAW elongation more reliable than other pipe types? Let’s compare. Spiral welded pipe’s elongation varies because the weld is at an angle. If the weld hits a stress point at a bad angle, it breaks easier. ERW (Electric Resistance Welded) pipe is good for small diameters, but the weld is thinner, so elongation drops off. LSAW’s straight seam weld is fused all the way through the pipe wall, so the elongation is consistent along the entire length. That’s why we get so many repeat customers— they know when they order LSAW from us, the elongation is tested, certified, and not a guess.

Wait, let’s talk about how we manufacture LSAW to get that good elongation. First, we start with high-grade steel plates from trusted mills (no scrap metal here, that’s a waste). The plates are heated, then rolled into a curve to make the tube shape. Then the submerged arc welding happens— we use two welds: one on the inside of the pipe, one on the outside. That double weld makes the seam way stronger than a single weld. Then we do a heat treatment step, called stress relieving. That step removes any leftover tension from rolling and welding, which keeps the elongation consistent. If we skipped that, the pipe would be more prone to cracking when stretched, so elongation would be lower. That’s a step some budget suppliers skip to cut costs, but we never do— it’s why our pipes hold up.

I also wanna cover when elongation becomes a problem. If you see a pipe that’s been stretched and has a tiny crack along the seam, that’s usually low elongation. Or if during a pressure test, a pipe bulges a little before leaking— that’s because the steel can’t stretch enough to handle the pressure. For our customers, we do 100% quality checks on every batch: every pipe gets a visual inspection, the weld is tested with ultrasonic testing, and a random sample from each batch goes to the lab for elongation testing. We give you a test report for every order, so you know exactly what you’re getting.

Let’s bring this back to you, the person who’s actually putting this pipe to work. If you’re a project manager checking specs, or an engineer picking pipe materials, don’t just skip over the elongation line on the spec sheet. That number is a clue to how the pipe will perform over 20, 30, even 50 years. I’ve seen projects fail because they went for cheaper pipe with lower elongation, and cost way more to fix than they saved upfront. On the flip side, I’ve watched projects go off without a hitch because they got the right LSAW pipe with the right elongation, tailored to their needs.

Now, if you’re in the market for LSAW pipe and you wanna chat through your specific project— whether it’s a pipeline, structural support, water main, whatever— hit me up. I don’t do sales jargon, I’ll tell you straight what pipe will work, what won’t, and what’s a fair price. We’ve got pipes in all sizes, grades, and elongation specs, ready to ship. Don’t leave your project to guesswork— let’s talk, and I’ll make sure you get the right product for your needs.

Before I wrap up, I wanna add a quick note: I’ve been in the pipe game for 12 years, and the most important thing I’ve learned is that specs mean nothing if they don’t fit the actual job. Elongation isn’t just a number on a paper, it’s the difference between a pipe that lasts and one that becomes a headache. That’s why we don’t just sell LSAW pipe— we sell solutions that work for you.

If you’re ready to place an order, or just have questions about elongation, sizes, grades, whatever, reach out to our team to start the conversation. No pressure, no upsells, just straight talk about what your project needs.

Scaffolding Pipes References
ASTM A673/A673M – Standard Specification for Sampling Procedures and Test Methods for Tension Testing of Line Pipe
API 5L – Specification for Line Pipe
ASME B31.8 – Gas Transmission and Distribution Piping Systems


Tianjin Brisk Metalwork Co., Ltd.
Tianjin Brisk Metalwork Co., Ltd. is well-known as one of the leading lsaw pipe manufacturers and suppliers in China. If you’re going to buy high quality lsaw pipe at competitive price, welcome to get more information from our factory.
Address: NO.5 MEIYUAN ROAD, HUAYUAN INDUSTRIAL ZONE,BINHAI HIGH TECH ZONE, CHINA
E-mail: sales@briskmetal.com
WebSite: https://www.steelbrisk.com/