Posted in

Do commercial solar panels work in cold climates?

If you’ve ever driven through Minnesota in January and spotted a row of commercial solar panels glinting under a sky full of gray, you might have done a double-take. For years, a common myth has stuck like snow to a rooftop: solar panels don’t work in cold climates. As a commercial solar panel supplier who’s spent the last decade installing systems across the Upper Midwest, New England, and even parts of Canada, I hear this question almost weekly. Today, I’m breaking down the science, the real-world data, and why cold climates aren’t just viable for solar—they’re some of the best places in the world to deploy commercial solar systems. Commercial Solar Panel

First, let’s tackle the big scientific myth: cold temperatures are bad for solar panels. To understand this, we need to start with how a solar panel actually produces electricity. Most commercial panels use silicon photovoltaic (PV) cells, which generate power when sunlight hits them and knocks electrons loose. The open-circuit voltage (Voc) of these cells—essentially the maximum voltage they can produce without a load—varies with temperature. Here’s the key detail: silicon PV cells have a negative temperature coefficient for voltage. That means as temperatures drop, the Voc of a single cell goes up. For every degree Celsius below 25°C (77°F), a typical silicon cell’s voltage increases by roughly 0.38% to 0.5%.

Wait, but what about efficiency at higher temperatures? You’ve probably heard that panels work better in cool weather, which is true for a different reason: high temperatures cause electrons to collide more often, generating heat instead of electricity. At temperatures above 25°C, panel efficiency drops by about 0.3% to 0.5% per degree Celsius. So a panel that’s 20% efficient at 77°F might drop to 18% efficient at 100°F—but at 0°F, its voltage is higher, and there’s far less wasted energy as heat. The net result? For every 1,000 kWh of sunlight a panel receives, it will produce more electricity in cold, cool conditions than in sweltering heat. I’ve seen this firsthand with our own test panels in Duluth, Minnesota: on a clear January day, when temperatures hovered at 10°F, a 100-kilowatt (kW) system produced 5-7% more energy than the same system would on a 95°F July day with the same amount of sunlight.

But cold climates bring more challenges than just temperature. Snow is the biggest one on most people’s minds. How do panels perform when covered in several inches of snow? The good news is that commercial solar panels are mounted at an angle—usually between 15 and 40 degrees, depending on latitude—to maximize sunlight exposure. That slant is perfect for letting snow slide off, rather than settling on the surface. We design all our commercial systems with latitude-specific tilt angles, so in northern Minnesota, for example, we use a steeper tilt (35-40 degrees) to let winter snow slide off easily. Even if a thin layer of snow does cover a panel, PV cells respond to sunlight through light, not heat—so as soon as a breeze blows, or the sun rises a few degrees higher in the sky, the snow melts from the bottom up, or slides off entirely. I remember a client in Buffalo, New York, last year who had 200 kW of panels installed before a 12-inch snowstorm hit. Within 48 hours, 90% of the panels were clear enough to produce energy, and by the end of the week, all were back to full output. The only time we’ve seen sustained snow coverage is in mountainous areas with extreme winds, and even then, we adjust mounting heights and tilt to minimize that risk.

Another factor to consider is sunlight availability. A common misconception is that cold climates get less sunlight in winter. While it’s true that northern regions have fewer daylight hours in December, the sun is also much higher in the summer, leading to longer days that can compensate. In fact, studies from the National Renewable Energy Laboratory (NREL) show that places like Germany (which is far north, with cloudy winters) generate more electricity per kW of solar capacity on an annual basis than many parts of the American Southwest. Wait, that’s a big claim—but it’s true. Germany is a global leader in solar installations, with over 58 GW of capacity, and their annual per-kWh output is only slightly lower than Arizona’s. Why? Because Germany’s cooler temperatures mean less energy waste from heat, and their tilt angles are optimized to capture winter sunlight, not just summer. For commercial properties that run year-round—grocery stores, warehouses, office parks—this steady annual output is way more valuable than high summer output that goes unused when businesses are closed or energy demand is low.

Let’s talk about real-world commercial installations to back this up. Last year, we completed a 500 kW solar system for a grocery chain in Minneapolis, Minnesota. The system is mounted on the rooftop of their 100,000-square-foot distribution center, which stays heated year-round but has plenty of unused rooftop space. In 2023, that system produced 628,000 kWh of electricity. Let’s compare that to a hypothetical identical 500 kW system in Phoenix, Arizona. According to NREL’s PVWatts calculator, that same system in Phoenix would produce around 650,000 kWh annually—only 3.5% more, even with 200 more hours of sunlight a year. That gap is exactly because of the temperature effect: the Minnesota system’s output didn’t drop as much in summer, and its cold winter days produced more energy than a Phoenix panel would on cool winter afternoons. The Minneapolis system also saved the grocery chain over $75,000 on electricity bills in 2023, and its payback period is just 6.8 years—shorter than the Arizona system’s 7.2 years, because the annual output is so consistent.

What about winter maintenance? Do panels hold up in cold climates? The short answer is yes, if they’re installed correctly. Commercial solar panels are built to withstand harsh conditions: most have a tempered glass surface that resists hail, and frames made of aluminum that doesn’t rust (unlike steel, which can corrode in road salt or snow melt). We test all our panels to meet IEC standards, which include exposure to temperatures as low as -40°F, extreme wind speeds, and heavy snow loads. For rooftop systems, we also work with commercial roofing contractors to ensure mounting systems are properly sealed, so snow melt doesn’t cause leaks. I’ve had clients worry about ice damming on their rooftops, but with proper ventilation and heat tracing (an optional add-on we offer for extreme climates), ice damming around panel mounts is rare and easy to prevent.

There are a few small adjustments we make for cold climate installations, but none that add significant cost or complexity. First, we use anti-reflective coating on panels that’s optimized for low-angle winter sunlight, so they capture more of the weak sunlight that comes in January and February. Second, we add ground fault protection systems that are calibrated for cold temperatures, since wiring can contract slightly in freezing weather, but this is a standard component of all our commercial systems, not an extra cost. Third, we offer solar monitoring tools that track panel output in real time, so clients can see when a panel is covered in snow or needs maintenance—though snow coverage is rarely a long-term issue.

So why does this myth persist? For decades, residential solar was the main focus in sunny states, and most commercial solar providers didn’t invest in research for cold climates. But in the last five years, more businesses in cold regions have realized that their high electricity bills (many northern states have higher utility rates than the Southwest) combined with the solid solar output makes commercial solar a no-brainer. We’ve installed systems for everything from ski resorts in Vermont to school districts in Michigan, and every single one has outperformed our initial projections. A school district in Des Moines, Iowa, installed a 1.2 MW system in 2022; in its first full year, it produced 1.5 million kWh, 8% more than we projected, saving the district $180,000 in energy costs that went back to classroom programs.

If you’re a commercial property owner in a cold climate—whether that’s in the Upper Midwest, Northeast, or Canada—and you’ve been debating solar, I want you to hear this: commercial solar panels absolutely work in cold climates, and in many cases, they’re a better investment than systems in warmer regions. The steady annual output, lower efficiency losses from heat, and rising utility rates make solar a way to lock in energy costs for 25+ years, regardless of winter temperatures or snowfall.

We’ve helped hundreds of businesses across cold climates make the switch to solar, and we’d be happy to walk you through the specific numbers for your property—no pressure, no sales pitch. All we ask is that you reach out to discuss your needs, and we’ll provide a custom system design and output projection tailored to your location, building size, and energy usage.

Commercial Energy Storage Batteries Reference:
National Renewable Energy Laboratory. (2021). PVWatts Version 8: A Web Tool for Calculating Photovoltaic System Energy Production. U.S. Department of Energy.
International Electrotechnical Commission. (2020). IEC 61215: Crystalline Silicon Terrestrial Photovoltaic (TPV) Modules – Design Qualification and Type Approval.
Fraunhofer Institute for Solar Energy Systems. (2022). Germany’s Solar Energy Performance Report: Annual Output and Efficiency in Cold Climates.


Voltix Technology Co., Ltd.
As one of the most professional commercial solar panel manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to wholesale advanced commercial solar panel at competitive price from our factory.
Address: North of G220, Huanghe 2nd Road, Bincheng District, Binzhou City, Shandong Province, China
E-mail: export@voltixbattery.tech
WebSite: https://www.use-voltix.com/