Hey there, if you’ve ever stared at a bolt of that soft, velvety faux suede and wondered, “Wait, can I actually sew this without ruining it?” — you’re not alone. As someone who’s been supplying faux suede fabric for years, I get this question all the time, from hobbyists starting their first DIY jacket to small business owners prepping their new line of bags. The short answer? Yeah, you totally can — but it’s not exactly the same as sewing cotton or even regular suede (the real stuff, which is a whole different, way pricier beast). Let’s break this down like I’m chatting with you over a cup of coffee, no fancy jargon required. Suede Fabric

First off, let’s get one thing straight: faux suede is a man-made material, usually made from polyester microfibers or a mix of polyester and polyurethane (PU), designed to mimic the look and feel of real suede. The “faux” part is key here — it’s durable, budget-friendly, and way easier to work with than real suede (which is finicky, stains easily, and needs special cleaning). But its texture is what trips people up: that soft, napy, fuzzy surface can feel tricky to stitch through without leaving marks, or sliding around when you cut it. I’ve watched new sewers grab their regular sewing machine, sit down, and immediately run into issues, so let’s start with the basics you need before you even thread the needle.
First, supplies. Ditch your regular paper sewing patterns, for a second — faux suede is slippery, so you’ll want to use pattern weights instead of pins. Wait, pins? A lot of people say you can’t pin faux suede, and they’re not totally wrong. Pins leave little holes in the soft nap, and once you pull them out, those holes might show through your final project, especially after washing. Pattern weights (little metal discs, even washers you have lying around) hold the pattern down without damaging the fabric. I always recommend these to my customers, and 9 times out of 10, they swear by them way more than pins for faux suede.
Next, your sewing machine needle. This is non-negotiable. A regular universal needle works for lighter-weight faux suede, but if you’re working with a mid or heavy-weight faux suede (think upholstery fabric vs. a jacket lining), you’ll want a leather or microtex needle. Microtex needles are super sharp and have a narrow point, so they slice through the polyester fibers without pushing the nap out of shape — something a dull universal needle will do, leaving those ugly snags or stretched fabric. I always keep a pack of microtex size 80/12 on hand for all my faux suede projects, and I tell every customer to do the same. Thread is important too: stick with all-purpose polyester thread. It’s strong, doesn’t break easily when stitching through the dense microfiber, and won’t fade or fray like cotton thread will. Skip the heavy-duty upholstery thread unless you’re working on a furniture cover, because it might leave thick, noticeable stitches that ruin the soft look of faux suede.
Now, the big one: stitching itself. Let’s talk about machine settings. First, test, test, test. Always scrap a tiny piece of fabric first to adjust your stitch length. Faux suede is synthetic, so a straight stitch is fine for most projects, but if you’re doing seams that need a little give (like a jacket sleeve), a slight zigzag works too, but don’t overdo it. The stitch length: go a little longer than you would for cotton — around 2.5 to 3mm. Short stitches can cause the fabric to pucker, especially when you pull the seams tight. Also, lower your presser foot pressure. A regular presser foot that’s too tight will squish the nap and leave permanent marks, or even gum up the machine with microfibers. Most sewing machines have a dial for presser foot pressure — turn it down about 20% from your cotton setting. If you don’t have that setting, you can even put a piece of tissue paper or wax paper between the fabric and the presser foot while stitching — just tear it away after, and it prevents the fabric from sticking or being pressed down too hard. I’ve used this trick on so many projects, it’s a lifesaver for beginners.
Wait, what about the nap? That fuzzy surface is both faux suede’s best feature and its biggest headache when sewing. If you’re sewing a project where the nap direction matters (like a jacket or a bag, where lighting changes how the color looks), you have to cut all your pieces going the same way. Run your hand over the fabric: if it feels soft and smooth one way, and a little rough the other, that’s the nap direction. Cut every piece with that nap facing the same way — usually all pieces will have the nap going down, so when you wear it, the light hits evenly. If you’re working with a reversible faux suede (some of my stock is like that, perfect for accessories), you can skip the nap direction, but still be careful not to rub the fabric too much while you work — rubbing can cause “nap burn,” those little shiny patches where the fuzz gets flattened.
What about sewing by hand? I get asked that a lot too. Hand-sewing faux suede works, but it’s way more time-consuming than machine sewing, and you have to be extra careful with the needle piercing. Use a small, sharp hand-sewing needle (size 9 or 10) and the same polyester thread. If you’re doing small details, like attaching buttons, that’s fine, but I don’t recommend sewing entire seams by hand — it’s easy to leave uneven stitches, and pulling too tight can cause holes in the fabric.
Now, common mistakes I see all the time from people who contact me about their faux suede projects. First, not pre-washing the fabric. Wait, can you even wash faux suede? Yes, most of it is machine-washable on a gentle cycle, cold water, but some heavy upholstery ones are dry-clean only. Always check the care label when you buy, but pre-washing before you sew is a good idea. Cotton shrinks, and even synthetic faux suede can have a little shrinkage from heat or water, so pre-wash it first so your finished project doesn’t end up too small after the first wash. Another mistake: ironing. Do not iron faux suede. The heat from an iron will melt the polyester fibers, leaving big shiny spots or even holes. If you need to get wrinkles out, use a steamer, held 6 to 8 inches away from the fabric, and don’t touch the steamer directly to the nap. That’s another trick I tell all my customers — I once had a small business owner ruin a whole batch of bags because she ironed them, and now I make sure to mention that to everyone who buys from me.
What about different types of projects? Faux suede works for everything from tiny accessories (hair clips, keychains) to big upholstery jobs. For small projects, you can even use double-sided fusible web to attach pieces without sewing, but make sure you use a low-temperature fusible — high heat will melt the fabric. For bigger seams, like a couch cover, you might want to use a walking foot on your sewing machine. A walking foot has extra feed dogs that pull the top and bottom layers of fabric through the machine at the same rate, so they don’t slide or stretch out of alignment. That’s a must for heavy upholstery faux suede, which is thick and can shift a lot when you stitch it.
I should also mention that not all faux suede is created equal. A lot of people come to me saying they bought cheap faux suede from a craft store, and it’s falling apart when they sew it — that’s the problem. The quality of the fabric you start with makes all the difference. Low-quality faux suede has a thin, flimsy backing that splits when you stitch through it, or the nap sheds all over your machine while you’re working. The faux suede I supply is high-density polyester, with a thick, stable backing that doesn’t split, and the nap is locked in so it barely sheds — that’s why so many designers and small businesses order from me. When you use good fabric, the sewing process is way smoother, and your final project looks professional, not DIY.
Wait, what about finishing seams? Faux suede doesn’t fray as easily as cotton, so you don’t have to overthink seam finishing. For most projects, a straight stitch seam pressed open (carefully, with a steamer) works, or you can leave the seam allowances as is and trim them close for a clean look. If you want a more polished edge, you can use a serger, but a basic zigzag stitch along the raw edge works too — just don’t pull it too tight, or it will pucker. For projects where the seam will be on the outside, like a lined bag, you can topstitch the seam to make it look intentional, and that also adds durability.
I’ve had customers come to me saying they were nervous to sew faux suede because they thought it was too hard, but after following these steps, they made jackets, hats, even dog beds that turned out amazing. The key is to take it slow, test everything on scrap fabric first, and invest in a good quality fabric (no cheap off-brand stuff that will give you headaches).
At the end of the day, sewing faux suede is totally doable — it’s just a little different than sewing your basic cotton or linen. It’s not that much harder, it just has a few specific tricks to make the process go smoothly. If you’ve been avoiding working with faux suede because you thought you couldn’t sew it, don’t — grab your pattern weights, your microtex needle, and that high-quality fabric, and give it a shot. You might be surprised by how great your final project turns out.

If you’re looking for reliable, high-quality faux suede fabric for your next project, whether it’s a small DIY or a big business order, we’ve got you covered. Our range of faux suede comes in all weights and colors, perfect for jackets, bags, upholstery, accessories, and more. Reach out to us to chat about your needs, get samples, or place an order — we’re here to help make your sewing project a success.
Linen Print Fabric References
- The Spruce Crafts. (n.d.). How to Sew Faux Suede Fabric. Retrieved from sewing resource database for fabric-specific techniques
- Textile Institute. (2019). Synthetic Suede: Composition, Properties, and Sewing Guidelines. International Textile Standards Journal
- SewDaily. (n.d.). Common Mistakes When Working with Faux Suede. Sewing Tips and Tricks Archive
Shanghai Jason Textile Co., Ltd.
Shanghai Jason Textile Co., Ltd. is one of the leading suede fabric manufacturers and suppliers in China. We warmly welcome you to wholesale high-end suede fabric for sale here from our factory. All ladieswear fabrics are with high quality and low price.
Address: 21BC, No. 1365 Dongfang Road, Pudong, Shanghai
E-mail: Rebekah@worldbest.net.cn
WebSite: https://www.worldbestjason.com/