Hey everyone, thanks for stopping by my blog. If you’re in the manufacturing game—whether you’re a small shop just scaling up or a mid-sized production plant—you’ve probably wondered at some point, “What’s it actually cost to run a plastic injection machine?” I get it, because as a plastic injection machine supplier, I talk to people every week who only look at the upfront price of a machine and totally miss the ongoing costs that add up fast. That’s why I’m breaking this down real, no fancy jargon, just the straight stuff I tell every customer when they reach out. Plastic Injection Machine

First off, let’s get one thing straight: there’s no one-size-fits-all number here. A tiny 50-ton machine making bottle caps for a local soda shop runs way different than a 500-ton machine cranking out car door panels for a big auto brand. But I’ll walk through all the key costs so you can calculate it for your own setup, no matter what you’re running.
Let’s start with the big one most people notice first: energy costs. This is the killer that sneaks up on you. Old machines are usually hydraulic, and they guzzle electricity like nothing else. A 100-ton hydraulic machine, idle or running, might use 8–12 kWh per hour. At the average US commercial electricity rate of about $0.15 per kWh, that’s $1.20 to $1.80 per hour just for power. If that machine runs 24/7, 5 days a week, that’s roughly $1,800–$2,700 a month. Wait, but what if you’re using an electric or hybrid machine? Electric machines only use power when they’re actually moving the mold or injecting plastic—no waste from hydraulic pumps idling. A 100-ton electric machine might use 3–5 kWh per hour, cutting that energy bill by more than half: $0.45–$0.75 per hour, $675–$1,125 a month. I always tell customers to think about energy use over the machine’s lifespan, not just the upfront cost. Sure, electric is pricier to buy new, but the energy savings pay for themselves in a year or two.
Next, plastic material costs. This is another huge one, and it’s totally dependent on what parts you’re making. Let’s say you’re using common plastic like PET for bottles or PP for packaging—those run around $1–$2 per pound. Every injection cycle uses a set amount of plastic: a small cap might use 0.02 pounds, a car bumper might use 20 pounds. On average, a mid-sized injection machine uses about 100–500 pounds of plastic per day if it’s running full tilt. At $1.50 per pound, that’s $150–$750 a day, or $3,750–$18,750 a month. Wait, but there’s waste here, right? No machine is perfect—there’s runner scrap, defective parts, material that gets spilled or left in the barrel. Good operators aim for 5–10% waste, but if your setup is old or you’re running complex parts, that could jump to 15%. I always tell new customers to budget for that extra waste, because skipping it leads to headaches later.
Then there’s mold costs, which people also forget is tied to running the machine. The mold is the thing that makes your part—you can’t run the machine without one. A basic mold for a simple part might be $2,000–$5,000, while a complex multi-cavity mold for small parts could be $20,000+. Now, how does that tie to per-running cost? Let’s say a $10,000 mold lasts for 100,000 cycles. That’s $0.10 per cycle for mold wear and tear. If your machine makes 1,000 cycles a day, that’s $100 a day, or $2,500 a month. But wait, mold maintenance adds to this too. You have to clean it, repair small chips, lubricate it—maybe $500–$2,000 a year for a mid-sized mold, spread that out and it’s about $40–$165 a month. If you skip mold maintenance, you’ll get more defective parts and mold replacements way sooner, so don’t cut corners here.
Labor costs are next, and this varies a lot by where you’re located. In the US, a skilled injection machine operator makes about $20–$35 an hour, plus benefits, so that’s $25–$45 an hour per operator. If you run one machine 24/7, you need at least 3 operators on shifts, so that’s $1,800–$3,240 a day, or $45,000–$81,000 a month. But if you’re a small shop running one machine 8 hours a day, 5 days a week, that’s just $1,000–$1,800 a month. I see so many small business owners try to run machines themselves to save money, but that usually backfires—operator errors lead to broken parts, wasted plastic, and down time. A good operator is worth every penny.
Don’t forget maintenance and repairs. Machines don’t run forever without TLC. For a new machine, annual maintenance is usually about 2–3% of the machine’s purchase price. So if you have a $50,000 electric machine, that’s $1,000–$1,500 a year, or $85–$125 a month. But old machines (over 10 years) need more repairs—hydraulic seals, motor replacements, mold adjustments—those can add up to 5–10% of the machine’s value a year, or more if you’re running it hard. I always tell customers to budget at least 1–2% of the machine’s value every month for unexpected repairs, too. A broken motor that takes a week to fix means no production, lost revenue, so that’s a cost you can’t ignore.
Utility add-ons? Wait, no, I already mentioned electricity, but there’s also compressed air if you use it for part ejection, water for cooling the mold, maybe even gas for drying plastic pellets (most plastics need to be dry before injection, otherwise you get weak parts). A small dryer uses 1–2 kWh per hour, a cooling system for a mid-sized mold uses 2–4 kWh per hour. Add that to your energy bill, and that’s an extra $0.45–$0.90 per hour, so $1,080–$2,160 a month for a 24/7 setup. Easy to overlook these small costs, but they add up fast.
Wait, what about downtime? That’s a big one I almost missed. If your machine is broken, or you’re waiting for material, or a mold is damaged, you’re not making money, but you’re still paying for some costs—electricity for idle machines, maybe operator wages if they’re on site. Unplanned downtime can be 5–10% of total production time, depending on how well you maintain your machines. That’s a huge hidden cost. I’ve had customers tell me a single day of downtime cost them $10,000 in lost orders, so it’s not just the machine’s cost—it’s your revenue too.
Now let’s put this all together with a real example, so you can see how it works. Let’s say you’re a small shop running a 100-ton electric machine, 8 hours a day, 5 days a week, making small PP packaging parts.
Energy: 4 kWh/hour x $0.15 = $0.60/hour. 8 hours a week = $24 a week, $96 a month.
Plastic: PP at $1.50/lb, 20 lbs/day, 5 days a week = $150 a week, $600 a month, plus 10% waste = $660 a month.
Mold: $5,000 mold for 50,000 cycles, 1,000 cycles/day = $0.10/cycle, $100 a day, $400 a month, plus $500 annual maintenance = ~$425 a month.
Labor: Part-time operator for 8 hours a day, 5 days a week = $25/hour x 40 hours = $1,000 a week, $4,000 a month.
Maintenance: New machine, 2% of $50,000 = $1,000 a year, ~$85 a month.
Cooling/dryer: 2 kWh/hour = $0.30/hour, $2.40/day, $96 a month.
Add all that up: $96 + $660 + $425 + $4,000 + $85 + $96 = $5,362 a month for this single machine. That’s a real number, no fluff. If you were running a hydraulic machine instead, the energy would jump to $216 a month, pushing the total to almost $5,500. If you ran it 24/7 instead of 8/5, that total would be around $16,000 a month.
Now, let’s talk about how to lower these costs, because everyone wants that. First, get the right machine for your parts. Don’t buy a 500-ton machine when you only need 100 tons—bigger machines use more energy, cost more to maintain. I see this mistake all the time with new customers who overbuy to “futureproof” but end up wasting money on capacity they don’t use. Second, switch to electric or hybrid machines if you’re still running old hydraulics. The energy savings are huge over time, and less maintenance on hydraulic parts means fewer repairs. Third, optimize your setup: use high-quality plastic that doesn’t need as much drying, run longer shifts to spread labor costs, schedule regular maintenance so you don’t have unexpected breakdowns. Fourth, train your operators well. Bad operators waste plastic, break molds, cause downtime—good operators cut those costs by 10-15% easy.
Wait, but what about the upfront machine cost? I know that’s a big sticker shock, but it’s part of the total cost of ownership, right? A new electric 100-ton machine is about $40,000–$60,000, a used one is $15,000–$30,000. But when you compare that to running a machine for 10 years, the ongoing costs are way more than the upfront price. I always do a total cost of ownership (TCO) calculation for every customer, not just a quote for the machine. That’s the service I offer—no pressure, just honest numbers so you can see what you’ll actually pay, not just the initial cost.
A lot of people ask me if there’s a way to get a rough number for their specific setup. The short answer is: if you tell me your machine size, what parts you’re making, how many hours you run a week, and where you’re located, I can give you a custom TCO breakdown. I don’t do generic numbers because they’re useless—your parts, your location, your hours all change everything.
I’ll be real with you: running a plastic injection machine isn’t cheap, but it’s worth it if you’re set up right. The mistake is only looking at the upfront machine price and ignoring all the ongoing costs that add up month after month. I’ve seen customers get burned by cheap used machines that break every other week, or overpriced hydraulic machines that drain their energy budget. That’s why I’m transparent with every customer—no hidden fees, no fine print, just the facts.

If you’re shopping for a new machine or want to redo your current setup to cut costs, reach out. I’ll walk through your needs, give you a clear breakdown of all the costs, and answer any questions you have—no sales pitch, just straight talk. I’ve been doing this for years, and I know the ins and outs of every machine, every plastic type, every hidden cost. Don’t guess at what it will cost—get the real numbers from someone who works with these machines every day.
Plastic Injection Machine References
- Plastic Industry Association. (2023). Total Cost of Ownership for Injection Molding Equipment.
- U.S. Energy Information Administration. (2024). Commercial Electricity Rates by State.
- Society of Plastics Engineers. (2022). Injection Molding Maintenance and Operation Best Practices.
- Industrial Press. (2021). The Plastic Injection Molding Handbook, 4th Edition.
Ningbo Lisong Injection Molding Technology Co., Ltd.
As one of the most professional plastic injection machine manufacturers and suppliers in China, we’re featured by quality products and good price. Please rest assured to buy advanced plastic injection machine for sale here from our factory. Welcome to contact us for customized service and ODM service.
Address: No.16, Qiancai Road, Sanqishi,Yuyao City, Zhejiang, China.
E-mail: lisong@chinalisong.com
WebSite: https://www.in-jectionmachine.com/