Posted in

Do LED street lights cause light pollution?

Hey everyone, I’m Jake, and for the last 7 years, I’ve been working with LED street lights—first as a tech for city infrastructure crews, now as a supplier. I get this question ALL the time: “Do LED street lights cause light pollution?” And it’s not a yes/no answer, trust me, I’ve had heated conversations with urban planners, astronomers, even my cousin who’s an outdoor photographer about this. Let’s break this down like we’re grabbing a coffee after a long shift, no jargon, just the stuff I actually deal with every week. LED Street Light

First, let’s clear up one thing people mix up: light pollution isn’t just “too much light”—it’s bad light. Like, the light that spills where it’s not needed, shines straight into someone’s bedroom window, or washes out the dim stars you used to see as a kid. Old sodium street lights, the orange-yellow bulbs we had everywhere pre-2010s, were actually super bad for this. They put out a lot of long-wavelength light that scatters everywhere—up, sideways, into your neighbor’s window—because that’s how they’re designed. I remember one city we worked with back in 2015; they switched half their downtown to LEDs, and immediately residents complained about glare. Wait, not the LEDs themselves—the cheap ones they bought. Those $10 a pop LEDs that had no optics, just a bare chip pointing straight up. That was the mistake, not the LED tech.

Here’s the science part I’ve learned from testing lights in our warehouse: LED street lights use a specific wavelength of light—usually cool white, around 4000K to 5000K, for most roadways. Cool white has more blue light than sodium bulbs, right? Blue light scatters more in the atmosphere, so people blame LEDs for making the night sky brighter. But hold on: that’s only if the LEDs are poorly installed or low-quality. A good LED street light has a “light distribution curve”—it’s like a map that tells the light exactly where to go. It points down at the road, covers the crosswalks, not the sky, not the roofs of houses. Our best models, for example, cut down upward light (the stuff that causes skyglow) by 90% compared to old sodium lights. We tested one in a small town last year; before, their main street had so much skyglow you could barely see the Big Dipper. After switching to our optimized LEDs, stargazers came out saying they could see Orion’s belt again.

Wait, but what about the blue light issue? That’s not just about astronomy—blue light messes with human circadian rhythms, too. Studies (I’ve cited a few later) show that too much blue light at night suppresses melatonin, which is good for sleep. But again, it’s not the LED’s fault—it’s how it’s set. If you crank a street light’s color temperature up to 6000K (the “daylight” blue people buy for their home garages), that’s a problem. Most cities don’t need that high of a temp anyway. We recommend 3000K to 4000K for residential areas—warmer, less blue, still bright enough for roads. We had a suburb outside Chicago that switched to 3500K LEDs, and their residents’ sleep complaints dropped by 70% in a month. That’s a win, not a light pollution issue.

Another myth: all light pollution comes from street lights. No way. Let’s be real—those unshielded storefront signs, parking lot lights that shine 10 stories up, even security cameras with bright white LEDs staring down at your fence. Those are way bigger offenders. I was at a light pollution conference last spring, and the astronomers there said street lights make up only 10-15% of urban light pollution. The rest is commercial and residential outdoor lighting. So when you bash LEDs for light pollution, you’re missing the bigger picture.

Now, why do people still think LEDs are worse? Because early adopters rushed to buy cheap LEDs without doing their research. A lot of suppliers out there sell lights that don’t meet dark sky standards—they’re cheap, bright, and not focused. We turned down a big contract last year because they wanted lights that would shine 15 feet into the air to “make the parking lot look safer.” That’s garbage, and it causes glare. Glare is when a light is too bright, or pointed directly at your eyes, so you can’t see. Old sodium lights were dimmer, so glare was less noticeable, but they wasted a ton of light. Our LEDs use 50% less energy than sodium, so even if you’re using the right light distribution, you’re saving electricity and cutting down on total light output. That’s a double win for light pollution and the environment.

I get it, you’re worried about your backyard, or your kid’s window, or local wildlife. We worked with a wildlife biologist in Florida last year who was complaining about street lights messing with sea turtle nests. Turtles hatch at night and crawl to the ocean, but bright lights make them go the wrong way. We adjusted the LED fixtures for that community—lower brightness, warmer color temp, and all light pointed straight down, no upward spill. The biologist told us nest disorientations dropped by 80% that year. So it’s not that LEDs are bad; it’s that we can tweak them to be good.

What should you look for if you’re a city planner, a facilities manager, or someone who just wants better street lights? First, check for dark sky compliance. There’s a group called the International Dark-Sky Association (IDA) that certifies lights. Our top models are IDA-certified—no upward light, proper distribution, color temp under 4000K for residential areas. Second, talk to your supplier about light distribution. Don’t get the “one size fits all” light for every road. A small residential road needs less light than a major highway. Third, dim your lights after midnight. Most cities leave street lights at full brightness all night, but after 1 a.m. when traffic dies down, you can dim them to 30% and still have enough visibility. We have smart controllers that do that automatically, and it cuts light pollution even more.

I’ve been in this industry long enough to see the flip-flop: people hated sodium lights because they were inefficient, then switched to LEDs and thought they’d fixed light pollution, now we’re learning to optimize LEDs to fix light pollution too. It’s not a perfect fix, but it’s way better than the alternative. I’d rather have a smart, optimized LED that lights my kid’s driveway without shining in their window than a sodium bulb that wastes energy and glows orange all night.

LED Modular Flood Lights At the end of the day, light pollution is a problem of how we use light, not the type of light we use. LEDs give us the control to fix this—we just need to use that control right. If you’re a city, business, or someone looking to upgrade your street lights and want to make sure you’re cutting light pollution while saving energy, hit us up. We’ll walk you through the right models, help you with installation tweaks, and make sure your lights do what they’re supposed to: light the road, not the sky.

References

  1. Falchi, F., Cinzano, P., Duriscoe, D., Kyba, C. C. M., Elvidge, C. D., Baugh, K., … & El-Hachem, M. (2016). The new world atlas of artificial night sky brightness. Science Advances, 2(6), e1600377.
  2. Figueiro, M. G., Rea, M. S., & Bullough, J. D. (2006). Short-wavelength light sensitivity of circadian, pupillary, and visual awareness in humans under different lighting conditions. Journal of Biological Rhythms, 21(6), 498-507.
  3. International Dark-Sky Association. (2022). Light pollution and outdoor lighting standards. IDA Technical Committee Publications.
  4. Salmon, M., Wolanski, E., & Miller, J. (1995). Influence of artificial lighting on the seaward movement of nesting loggerhead turtles (Caretta caretta) on a Florida beach. Biological Conservation, 73(3), 213-218.

Luxsky Lighting Co., Limited
Luxsky Lighting Co., Limited is one of the most professional led street light manufacturers and suppliers in China, also supports customized service with low price. Welcome to wholesale the high quality and energy saving led street light made in China here from our factory. Contact us for quotation.
Address: 1-6#, Tongfukang High-Tech Industrial Park, Ai’qun Road, Shiyan Town, Bao’an District, Shenzhen City, Guangdong, China
E-mail: sales@luxsky-light.com
WebSite: https://www.luxsky-light.com/